No sound problem appeared to be one of the common issues encountered by iPhone users ever since the first major iOS release in 2007. And just like any other iPhone problems, no sound problem remains bugging more and more people as it still exists even on the new iPhones like the iPhone 8. In some cases, the no sound problem is just tied to the ringer switch that’s set to mute while others are attributed to software errors and glitches on the iPhone. It also appears to be one of the recent post-update issues particularly after the iOS 11 rollout.
In worst case scenarios, no sound problem on the iPhone can be due to a faulty audio component like a damaged headphone jack, microphone or speaker on the iPhone. Unfortunately hardware-related sound problems already require service in order to get fixed. This means setting up a service center visit. Otherwise, you may still attempt to fix the problem and take your chances with some applicable workarounds on your end. If you need some more inputs on what to do, then you may include any of the potential solutions I have mapped out below this page.
Before we move any further, if you are looking for a solution to a different problem, them drop by our iPhone 8 troubleshooting page for we have already addressed some of the most common problems with this device. Odds are that there are already existing solutions to your problem. Try to find issues that are similar with yours and use the solutions we suggested. If they don’t work or if you need more help, fill up our iPhone issues questionnaire and we’ll help you with you problem.
How to fix your iPhone 8 that makes no sound
Before you start troubleshooting, try to adjust or set the Volume on your iPhone 8 to the highest level then see if that makes a difference. Just press the Volume Up key until it reaches the loudest. If that won’t work either, then you may go ahead and begin troubleshooting.
Toggle the ringer switch
Many people would tend to neglect or overlook this workaround and immediately jump into performing various methods to troubleshoot no sound problem on their iPhone. That said, verify and ensure that the Ringer switch is not set to mute or silent mode. You may have flipped the switch accidentally and that’s why your iPhone is suddenly not making any sound.
So here’s what you should do first:
- From the top left corner of your iPhone 8, flip the Ringer switch to turn Silent Mode on. Doing so turns off sounds on your iPhone. You will see the switch is in red/orange position and the silent mode or ringer notification briefly shows up on screen.
- After a few seconds, flip the switch again to set it back to ringer mode.
If the switch appears to be stuck, try to remove any case from your iPhone to ensure that the switch isn’t blocked.
Test to see if you can now hear sounds from your iPhone.
Perform a Soft reset or Force restart your iPhone 8
No sound problem can occur among minor software glitches transpiring on the iPhone. In this case, a soft reset or force restart can be considered the simplest possible solutions. You can try a soft reset or usual reboot by pressing the Side/Power button then drag the Power Off slider to turn your iPhone phone. And then after 30 seconds, press Power to turn the iPhone back on.
Alternatively, you can restart your iPhone forcibly (force restart) with these steps:
- Press and quickly release the Volume Up button.
- Then press and quickly release the Volume Down button.
- And finally, press and hold the Side/Power button until the Apple logo appears.
A force restart can be considered an option especially if the problem occurs while using certain rogue audio app that caused your iPhone screen to freeze. Similar to a soft reset, no data will be affected in the process.
Turn off Bluetooth on your iPhone 8
You may have forgotten that your iPhone is actually paired or connected to a Bluetooth accessory. In that case, it’s possible that the sound/audio output from your iPhone is rerouted to the Bluetooth device it’s paired with. To rule this out from the possible causes, just turn off Bluetooth on your iPhone 8. Here’s how:
- Tap to open Settings.
- Tap Bluetooth.
- Then tap the Bluetooth switch to turn the feature off.
Turning off Airplane Mode also turns off Bluetooth automatically on your iPhone.
After making these changes to your Bluetooth settings, restart your iPhone and then try to see if that fixes the problem.
Reset all settings on your iPhone 8
Sounds settings can be changed automatically or manually. If you’ve made some changes to your iPhone 8 settings recently and then find out that your iPhone stops making sound, it’s possible that the no sound problem is due to the recent changes you’ve made. The same thing can happen when you install new software update on your iPhone. Some updates automatically change or override your current settings and therefore may result to a conflict. To fix this issue, try to reset all settings on your iPhone 8 with these steps:
- Tap Settings from the Home screen.
- Tap General.
- Tap Reset.
- Select the option to Reset All Settings.
- If prompted, enter the correct passcode for your device.
- Tap Reset All Settings to confirm.
Unlike a factory reset, this reset will not affect any of your iPhone data. Your iPhone reboots when the reset is finished so just wait until it boots up completely then try to check if sound or audio functions are now working properly on your iPhone.
Master reset or iOS restore
If the prior methods and resets failed to fix the problem and your iPhone 8 still has no sound, then your next best option would be a master reset or system restore. But it is also worth noting that both these methods affect your iPhone data. A factory reset wipes everything from your iPhone including personal information, personal settings and critical data and then restores your iPhone to default factory settings. An iOS restore on the other hand, wipes everything from your device and allows you to restore it to a previous iOS version (downgrade) or factory defaults. Either methods can likewise obliterate tough bugs from the iPhone system that may have caused no sound problem on your iPhone 8. Just be sure to back up your iPhone data beforehand.
A factory reset can be carried out through your iPhone settings while an iOS restore through iTunes.
To do so, just head over to Settings-> General-> Reset-> Erase All Content and Settings-> then tap to confirm option to erase your iPhone.
Should you wish to proceed with iOS restore, you will need to secure a computer with the latest version of iTunes software installed. Connect your iPhone to the computer using the supplied USB cable, wait for iTunes to recognize your iPhone and then follow the onscreen instructions to proceed with iOS restore in iTunes.
Other Helpful Suggestions
- Check and clean up the docking area on your iPhone. It may be just some dirt and dust clogging the docking area and somehow blocks the iPhone’s sound output. If that is so, then all you have to do is clean it up.
- Plug your headphone in and out of the headphone jack for about 3 to 5 times. Doing so can help remove any stuck grime or dust from the headphone jack that might have barred the sound output.
Contact Apple Support for further recommendations if the no sound problem on your iPhone 8 continues after exhausting all efforts. Otherwise, you may need to have your iPhone diagnosed by a technician for possible hardware damage. This can be necessary if there were previous instances of dropping or liquid exposure on your device.
Connect with us
If you need more help with the use of certain functions and features of the new Apple iPhone 8 smartphone, feel free to visit our Tutorial Page. There you can find a list of how-to contents, step-by-step tutorials, as well as answers to FAQs regarding iPhone 8. If you have other concerns or encountered some troubles while using the phone, you can reach us through this form. Just be sure to tell us more details of the problem or device issue(s) you may have and we will be more than happy to assist you further.