How to fix Apple iPhone 6 Plus screen flickering and other relevant issues

This article contains recommended methods to deal with screen flickering and other screen problems on the Apple iPhone 6 Plus (#Apple #iPhone6Plus). While software glitches may sometimes trigger touchscreen problems to occur on your device, most of these issues are linked to a faulty hardware component, like a defective screen and loose connections within the display circuit.

Apple iPhone 6 Plus screen flickering

Read on to learn more on what causes screen problems like screen flickering to emerge on your iPhone device and how to fix them.

To make this article more specific, I’ve intend to highlight an excerpt of an associated problem sent to us by one iPhone 6 Plus owner, saying his iPhone screen randomly flickers and somehow behaves oddly.

“All of a sudden my iPhone 6 Plus began to freeze, open up apps on its own, scrolling pages, and the screen flickers. This happens randomly. I’m sure it has never been exposed to water or liquids. Will you be able to help me fix it?”

What could possibly cause your iPhone screen to flicker or misbehave?

Device issues are categorized into two types — software-related and hardware-related. Software-related issues have a higher chance of getting resolved by user-defined workarounds compared to issues linked to hardware. The latter often requires professional aid to get your device fixed. In some cases, an iPhone screen may flicker, freeze, or become unresponsive due to some settings that are misconfigured or certain apps suddenly went rogue.

Basing on the given problem statement, it’s a bit hard for us to determine if the problem is due to a faulty hardware or software. Although the user has said that the device was not exposed to water/liquid, he failed to state if there’s any instance when the phone fell or was dropped. For this reason, I’ve decided to demonstrate all possible workarounds applicable for software- and hardware-related screen issues on the iPhone 6 Plus.

Recommended Workarounds/Solutions for iPhone 6 Plus screen problems

After digging through some forums threads and posts, I’ve managed to come up with the following list of recommendations to anyone who is having similar problems with their iPhone 6 Plus screen, as described in the aforesaid problem statement.

You may try any of these methods to fix screen flickering, freezing, and unresponsive touchscreen on your iPhone, whatever you think is best applicable to your situation.

Important Note: Be sure to test your device after completing each of the following troubleshooting steps to see if the problem is fixed. Proceed to the next step(s), if necessary.

Screen problems associated with faulty software or corrupted applications can be rectified by performing any of the following procedures:

Step 1: Restart your iPhone. Most of the time, small bugs can easily be fixed by a simple reboot on your phone. Hold down the Sleep/Wake button and Home buttons simultaneously until the Apple logo appears.

Also ensure your phone has sufficient battery power and that the battery is not damaged as these too could trigger your screen to act weird.

Step 2: Configure Display settings. Some iPhone users who have experienced similar screen problems on their device fixed them by reducing the screen brightness.  You can also try to disable auto-brightness and see what happens.

To make your iPhone 6 Plus screen brighter or darker, slide your finger up from the bottom of the screen (from any screen). This will open the Control Center. From there you can touch and drag the slider to manually adjust screen brightness.

Alternatively, you can go to the Home screen, select Settings-> Display & Brightness-> Turn off Auto-Brightness. And finally, set the brightness by dragging the slider under Brightness.

Step 3: Enable Reduce Transparency feature. For iPhone’s running iOS 9 this option can be accessed through Settings-> General-> Increase Contrast-> and then tap the switch next to Reduce Transparency to turn it on.

Note: Menu options may vary depending on the iOS version your device is running on and also by carriers.

Enabling this feature would make the text on your device a little more legible. It’s a temporary workaround utilized by some users who have problems on unresponsive touchscreen and random flickering on their iPhone display.

Step 4: Check memory (RAM) status. Frozen and unresponsive displays are common indicators of a memory issue, particularly insufficient memory on your device. To make sure this is not causing the problem, check your iPhone and make sure its internal memory storage is good enough to carry out more processes.

Step 5: Factory reset your iPhone. This should be your last resort. Performing this method will not only require more time but also wipes your iPhone data while restoring it to factory default settings. Therefore, it eliminates the likelihood about the screen problem being caused by corrupted software.

If none of the aforesaid workarounds have done well, and the screen problem persists, then most likely the hardware is to blame. Considering this is your case and that your iPhone is not in warranty anymore, performing the following methods might be helpful.

  1. Ensure your iPhone screen is clean. Dirt or dust accumulated on your phone’s display may also result to display issues including unresponsive touchscreens. Thus, keep your iPhone screen free from dust or dirt.
  2. Replace LCD screen. Screen problems like flickering, frozen or unresponsive touchscreen could be due to a defective LCD. If you’re capable enough of replacing your iPhone’s LCD screen by yourself, then you may purchase and replace it with a new one.

If both the old and new screens are showing the exact same problem, it’s possible that some circuit board components, including the touch circuit, touch connector and the touch IC, are damaged. Oftentimes, these cases can be rectified by re-flowing or re-soldering both the touch connector on the board and the touch IC.

You can also try to test different screens (if available) to determine which screen is not working. But then again, all these would require specialized soldering tools and lots of skills to produce positive results. Otherwise, you can just take your iPhone to an authorized Apple technician for damage check and repair.

Connect with us

If you have further questions and/or other concerns with your iPhone 6 Plus or other iOS devices, then you may visit our troubleshooting page. The page contains various problems relayed to us by other iOS device owners, along with the best possible solutions, troubleshooting methods, and recommendations. Should you wish to ask help from our iOS support team, simply fill up this form and hit submit. Be sure to provide us with as much information about the existing problem on your device, so we can come up with the best possible solution or recommendations.

You Might Also Like These Posts...

check esn feature
Wireless Photo Printers feature
spy on text messages feature
productivity apps feature
iphone repair near me feature


Leave a Reply
  1. Awesome it worked. Thank you
    Auto-Brightness was the cause. Thank you so much.
    I thought my phone was done. New life for the phone.

  2. Mine does this all the time and to get it to worm i have to bend the phone a little bit as its near enough unusable! i have not tried factory resetting yet as i do not want to do it and it not work all over again or become worse.. could anyone get back to me saying if it works or not?

  3. I have a 6plus 128gb that was becoming unusable due to flicker and random selections & lockups. I did a full factory reset, cleaned the phone, replaced the glass screen protector all to no avail. Following your guide I checked the software apps installed and saw a corrupted line on an old game. Deleted this and took auto brightness off and all resolved. I was just about to buy a new phone! Thank you so much. Note if software etc corrupt it seems to get restored on factory reset so manual checks etc as suggested are important.

  4. I have faced similar problem after I have changed my screen. the original screen was broken and I have changed it with a new screen which is not from apple. now it is acting wired. I have reassembled two for the second time but no change. do you think the problem is the faulty nature of the secreen?

  5. My resolves itself if I bend the screen slightly, which can’t be a good thing. I will try all of the options and see if it resolves anything.

  6. Hi I want to know that my Iphone6 plus got slipped from my hand and it is left with a Brocken touchscreen and irresponsive touch !
    I have been reported that its because of the failure of ic track .
    I dn know exactly what to do with it.
    Help me asap

    Need help!

  7. All I did was unplug my phone and it stoped flickering. I think this has something to do with how hot the charger was and it may have been tapping stuff near the bottom of the screen. I saw a video where a guy tazzed a phone near the home button and it flickered a tone, but when he stopped it worked normally. So if you are charging your phone, try unplugging it.

Leave a Reply

Your email address will not be published. Required fields are marked *