How to fix an iPhone 7 Plus that has no sound output from speakers after updating iOS [Troubleshooting Guide]

No sound output and other audio problems on an iPhone can be due to a software error or bad hardware. To determine whether it’s attributed to the software or hardware, try to recall what happened prior to the onset of the very first symptom. For example, did it occur after you dropped your iPhone or got it wet accidentally? Or did it instigate after making changes to your iPhone settings. If it falls on the first, then the no sound problem is most likely inflicted by hardware damage, which therefore denotes the need for service. Otherwise, you will need to deal with a software issue.

Tackled in this post is a pertinent problem in transpiring on the iPhone 7 Plus. This can be regarded as a post update issue since it occurred following an iOS update installation. In case you’re dealing with the same problem about audio malfunctions, particularly no sound output after updating your iPhone 7 Plus software to the latest iOS version available, I’ve mapped out some helpful walkthroughs and generic solutions for reference purposes. Read further if you need more help.

Now, before anything else, if you have other issues with your phone, make sure you drop by our troubleshooting page for we have already provided solutions to hundreds of problems reported by our readers. Odds are that we may have already provided a solution to the problem you currently have so try to find issues that are similar with yours on that page and feel free to use the solutions we suggested. If they don’t work or if you need further assistance, fill up our iPhone issues questionnaire and hit submit to contact us.

How to troubleshoot iPhone 7 Plus with no sound output after iOS update

Before you start troubleshooting, test to see if your iPhone speaker is working or not. To do so, navigate to Settings-> Sounds or Settings-> Sounds & Haptics, then drag the Ringer and Alerts slider up or down several times.

If you don’t hear any sound, then your speaker might have been damaged and therefore needs service. Otherwise, try these subsequent workarounds to troubleshoot your iPhone software and test the sound after each method.

Time Needed : 15 minutes

  1. Perform a soft reset or reboot your iPhone 7 Plus.

    A device restart or soft reset is the recommended last step when making software changes on any device. Doing so clears up the internal memory and refresh the system functions. Any minor glitches from updating will also be cleared in the process. u003cbru003eIf you haven’t yet restarted your iPhone after updating iOS, then you should do so with these steps: Press and hold the u003cstrongu003ePower buttonu003c/strongu003e for a few seconds until the u003cstrongu003eSlide to Power Off u003c/strongu003ebutton appears. Drag the slider to turn off your iPhone completely. After 30 seconds, press and hold the u003cstrongu003ePower buttonu003c/strongu003e and then release when the Apple logo appears.u003cbru003eAllow your device to finish booting up and then test to see if the audio functions are already working properly. If not, then move on to the next applicable solution.u003cbru003eu003cbru003eu003cimg src=u0022https://www.ikream.com/wp-content/uploads/2019/11/how-to-turn-off-iphone-x-1.jpgu0022 alt=u0022soft reset no sound on iphoneu0022 style=u0022width: 400px;u0022u003e

  2. Check and manage sound settings on your iPhone 7 Plus.

    Your iPhone settings, including audio/sound settings might have been automatically altered or overridden by the update. Unfortunately the output is not good since your iPhone ended up having no sound. What you can do then is to verify your iPhone settings and if necessary, configure sound options back to how they were before the new update was installed.u003cbru003eYou can first try flipping the ringer switch to turn silent mode on for a few seconds and then flip the switch back to ring mode. Also try pressing the Volume buttons, particularly Volume Up to make sure it's not set to the lowest level (mute). Doing so will increase the earpiece volume while on a call, media volume when streaming music or videos, and ringtone volume. Many people have found wonders from doing these simple tricks, so that might be worth a shot.u003cbru003eAnother thing you can do is to check and manage audio settings and sound options including Do Not Disturb feature.u003cbru003eTo do so, head over to u003cstrongu003eSettings-u003e Do Not Disturbu003c/strongu003e menu and then make sure that u003cstrongu003eDo Not Disturb featureu003c/strongu003e is off or disabled. Your iPhone may still not be able to play sound if DND feature is turned on unless you've set some exceptions. That can be ruled out by turning DND off on your iPhone.u003cbru003eIf the no sound problem only occurs to a certain app, then you may need to configure relevant settings from within the app to make it sound.u003cbru003eu003cbru003eu003cimg src=u0022https://www.ikream.com/wp-content/uploads/2018/06/DND-iphone-settings.jpgu0022 alt=u0022DND iphone audio issuesu0022 style=u0022width: 400px;u0022u003e

  3. Turn Bluetooth off, if necessary.

    You won’t hear any sound from your iPhone speaker if it’s paired or connected to a Bluetooth-enabled audio device because the audio output will be routed to the latter device. To make sure this is not what’s causing your trouble, turn Bluetooth off on your iPhone 7 Plus to remove pairing and enable audio outputs to the built-in speaker.u003cbru003eTo do so, head over tou003cstrongu003e Settings-u003e Bluetoothu003c/strongu003e menu and then tap the u003cstrongu003eBluetooth switch u003c/strongu003eto turn the feature off.u003cbru003eRestart your iPhone and then test to see if you can now hear it sounds.u003cbru003eu003cbru003eu003cimg src=u0022https://www.ikream.com/wp-content/uploads/2018/06/Bluetooth-iphone-audio.jpgu0022 alt=u0022turn off bluetooth no sound issuesu0022 style=u0022width: 400px;u0022u003e

  4. Reset all settings on your iPhone 7 Plus.

    To rule invalid settings out from the underlying cause, resetting all settings on your iPhone can help. This will delete all your customized options and configurations then restore the default or original values. Unlike a master reset, a system settings reset won’t affect your iPhone data and so you won’t lose any critical files you saved on the internal memory of your device. u003cbru003eHere’s how it’s done: Tap u003cstrongu003eSettingsu003c/strongu003e. Tap u003cstrongu003eGeneralu003c/strongu003e. Scroll to and tap u003cstrongu003eResetu003c/strongu003e. Select the option to u003cstrongu003eReset All Settings.u003c/strongu003e Enter your device passcode, if prompted. Then tap to confirm system settings reset.u003cbru003eWait until the reset is finished then restart your iPhone. After the restart, you will need to configure some settings and enable necessary options according to your preferences. If everything is set, test your iPhone to see if audio functions are already working.u003cbru003eu003cbru003eu003cimg src=u0022https://www.ikream.com/wp-content/uploads/2019/11/reset-all-settings-2.jpgu0022 alt=u0022reset all settings no audiou0022 style=u0022width: 400px;u0022u003e

  5. Restore your iPhone 7 Plus using iTunes.

    As your last resort, you can perform an iOS restore to wipe your iPhone and restore from a previous iOS backup or set it up as new. The update might have totally messed up the system settings and so a full system reset would be necessary. You may opt to restore your iPhone in recovery mode or perform a DFU mode restore through iTunes then. A more detailed walkthrough on how to perform a recovery mode restore and DFU mode restore is available on our iPhone 7 Plus Tutorials section in this site. Just visit our Troubleshooting Page for more details.

Tools
  • iOS 13.3
Materials
  • iPhone 7 Plus

Other options

Escalate the problem to Apple Support or your carrier so that they can make further assessments and if necessary, tag it among other post-update issues for immediate fixing. It’s possible that the new iOS update has some bugs that caused audio malfunctions on your iPhone 7 Plus. Ask for further recommendations and/or temporary solutions.

Alternatively, you can take your iPhone to an Apple Genius bar nearby and have it examined by an authorized technician. Doing so will rule hardware damage or damaged speakers out from the underlying causes. It is but also possible that your device has obtained some sort of physical or liquid damage from a previous instance of accidental drops or liquid exposure and it just happened coincidentally that the symptoms occurred after implementing the new iOS update on your device. That said, hardware checkup is also needed.

Connect with us

If you need more help with the use of certain functions and features of the new Apple iPhone 7 smartphone, feel free to visit our Tutorial Page. There you can find a list of how-to contents, step-by-step tutorials, as well as answers to FAQs regarding iPhone 7. If you have other concerns or encountered some troubles while using the phone, you can reach us through this form. Just be sure to tell us more details of the problem or device issue(s) you may have and we will be more than happy to assist you further.

Posts you may also like to read: