How to fix poor Wi-Fi reception or weak signal on iPhone X after iOS 13.2 update [Troubleshooting Guide]

Getting a poor Wi-Fi reception or weak signal on your iPhone X after iOS 13.2 update? Read further to find the appropriate solution for that problem.

Your phone’s Wi-Fi reception may lack in strength due to some wireless radio interference and other obstacles that might hinder connectivity. It could also be caused by faulty wireless router/modem that sends weaker signals to your device.

Mapped out below are common solutions that will help the iPhone X users deal with a poor Wi-Fi reception or weak signal after installing iOS 13.2. If you’ve been one of those affected users, find out how as you continue reading.

Troubleshoot iPhone X with poor Wi-Fi reception or weak signal after iOS 13.2 update

Thick walls that uses bricks and stones could heavily interfere with the Wi-Fi signal on your house. Metal, glass and mirrors also reflects signal and could cause a poor Wi-Fi reception or weak signal on your device. The issue can get worse if your device has been affected with random bugs inflicted by the recent update. The solutions that you’re about to perform will handle software-related causes and might fix the connectivity error on your iPhone X. Prior to performing the steps, ensure that your phone is on an area where Wi-Fi signal works best. You can verify that through other devices. Just check if they’re getting higher signal bars. Once ready, execute the steps below.

First solution: Reboot your wireless modem/router.

A faulty or old wireless router/modem can be prone to firmware crashes that could cause connectivity issues to some devices. It might have been the reason why your iPhone X is experiencing poor Wi-Fi signal reception, plus those software glitches. To remove this from the possible culprit of the issue, you may power cycle your wireless modem/router to remove firmware crashes and refresh its system. Here’s how:

  1. Press the power button on your modem/router until it powers down.
  2. While it’s turned off, unplug its AC adapter from the power source.
  3. Wait for at least 30 seconds then plug back in and turn it on.
  4. Allow the Wi-Fi signal indicator to be established and be stable.

Once the router has established proper signal, connect your device to your Wi-Fi network and see if the signal strength has improved. If not, move to the next procedure.

Second solution: Power cycle your iPhone X.

Refreshing the phone has been proven effective in dealing with minor software glitches that may have been causing connectivity errors and leads to poor Wi-Fi reception or weak signal on your iPhone X. Rebooting the device will also remove dump cache and clear erratic apps that’s affecting the phone’s performance.

To reboot your device, you can initiate a soft reset. Here are the steps:

  1. Press and hold the Power/Side button and either of the Volume buttons simultaneously for a few seconds.
  2. Release both buttons once Slide to Power off prompt appears on the screen.
  3. Drag the Power off slider to the right to turn off your phone.
  4. After 30 seconds, press and hold the Power/Side button again until you see the Apple logo.

You can also execute a force restart. This provides the same benefits as the soft reset but differs on how it’s executed. Here’s how it’s done:

  1. Press and release the Volume Up button quickly.
  2. Press and release the Volume Down button quickly.
  3. Lastly, press and hold the Side button for a few seconds until you see the Apple logo.

There’s no harm in trying both reboot process as they will not affect the phone’s memory, keeping personal information intact. After the reboot, check the Wi-Fi signal issue if it has been resolved.

Third solution: Toggle airplane mode on and off.

A simple toggle might provide an instant result in fixing the Wi-Fi signal issue on your device. Enabling the airplane mode will cut off all wireless radios while disabling it will resume them, giving a quick refresh to all connections. This will remove glitches that might have been affecting the Wi-Fi function on your device. To this process, refer to the steps below:

  1. Access Settings from the Home screen.
  2. Check Airplane mode. If toggle is currently turned on, tap on it to switch it off. If not, tap the toggle to turn it on.
  3. While the Airplane mode is enabled, perform a soft reset on your device.
  4. Wait for your phone to go back online after the reset then access Settings > Airplane mode. Tap the switch to disable the feature.

After disabling airplane mode, wait for the connections to be established and check if the issue has been rectified.

Fourth solution: Forget Wi-Fi networks to fix poor Wi-Fi reception or weak signal on iPhone X.

Conflicts that comes from the saved network could affect how your phone receives Wi-Fi signal. If the saved Wi-Fi networks on your device has succumb to software errors, it might be the reason why you got a poor Wi-Fi reception or weak signal after iOS 13.2 update. To rule this out, forget all saved Wi-Fi networks on you iPhone X by following these steps:

  1. From the Home screen, access Settings.
  2. Select WiFi.
  3. Look for the WiFi network that you want to forget then tap the information (i) icon next to the network name.
  4. Tap Forget This Network.
  5. Read the warning prompt then tap Forget to confirm.

Reboot your device after forgetting all Wi-Fi networks to remove dump cache and refresh the system. Once it boots up, reconnect to the desired Wi-Fi network and see if the issue is gone.

Fifth solution: Reset network settings on your iPhone X.

Invalid network settings that have been saved on your device could also affect the Wi-Fi reception. Incorrect network settings could occur if iOS 13.2 update tends to override some information automatically. This iOS override has been common with the previous software updates and it might be the reason why these connectivity errors suddenly occur after installing the recent software update. To deal with this, performing reset network settings might it as it will remove all customized network settings and revert to its default values and options. iOS overrides will be deleted along with the process. If you want to give this a try, here’s how:

  1. Access Settings from the Home screen.
  2. Tap General.
  3. Scroll down to and then select Reset.
  4. Tap the Reset Network Settings option.
  5. Enter your device passcode once prompted.
  6. Then tap to confirm network settings reset.

Your phone will reboot automatically after the reset is done. Allow the phone to boot up and check if this resolves the poor Wi-Fi reception or weak signal issue.

Other options

If all solutions failed in fixing the problem, you can try one method that will deal complex system errors. Perform a factory reset will help in fixing issues caused by stubborn glitches by deleting all contents on your device and reverting to the default factory configurations. If you’re interested, create your backups first through iTunes or iCloud to save your important files. Once ready, follow these steps to perform a master reset:

  1. Access Settings from the Home screen.
  2. Tap General.
  3. Scroll down to and then select Reset.
  4. Tap the Erase all contents and settings option.
  5. Enter your device passcode once prompted.
  6. Then tap to confirm all settings reset.

Once the reset is done, your iPhone X will reboot automatically. Setting up your phone like a new one is needed to use it again. Once the setup is done, check if you can use the Wi-Fi function properly.

Still having a poor Wi-Fi reception or weak signal on your iPhone X?

If the issue persists after performing all procedures above, you might need to contact Apple support and report the problem. They can provide you with additional information as well as official recommendation on how to fix the iPhone X with poor Wi-Fi reception or weak signal after iOS 13.2 update.

Leave a Comment