How to fix iPhone X that keeps losing Wi-Fi signal after iOS 13.2 update [Troubleshooting Guide]

There are a few factors that could cause iPhone X that keeps losing Wi-Fi signal. It could be due to the internet connection is poor and the Wi-Fi signal strength is not enough. If all devices that’s using the same network are being affected with the issue, it could be an issue with the Internet service provider or a faulty wireless modem or router.

Dealing with an issue on iPhone X that keeps losing Wi-Fi signal after iOS 13.2 update can be easy depending on how severe the bugs have affected your phone’s system. Found below are common workarounds that could help affected users resolve the problem on their device. If you’re one of them, find out how by reading further.

 

Also read: Common fixes for connectivity errors on iPhone X after iOS 13.2 update

Troubleshoot iPhone X that keeps losing Wi-Fi signal after installing iOS 13.2.

Updating to a new software version could impose threats on your device due to random bugs. iPhone X users are complaining about a bug with Wi-Fi signal that keeps disconnecting on their device after updating to iOS 13.2. The solutions that you’ll find below should address the concern caused by software glitches.

 

First solution: Reboot your iPhone X.

Addressing minor software glitches that may have caused the issue on your iPhone X that keeps losing Wi-Fi signal can be done by performing a reboot on your device. This process will enhance the phone’s performance and could improve some functions by expediting the implementation of changes from the recent software update. Doing so will not only remove dump cache but could remove incompatibility issues.

Performing a soft reset is just one way to reboot the device. Here are the steps:

  1. Press and hold the Power/Side button and either of the Volume buttons simultaneously for a few seconds.
  2. Release both buttons once Slide to Power off prompt appears on the screen.
  3. Drag the Power off slider to the right to turn off your phone.
  4. After 30 seconds, press and hold the Power/Side button again until you see the Apple logo.

An alternative method that will reboot your iPhone is a force restart. This could further enhance the system’s performance by killing rogue apps inflicted by iOS 13.2. Here’s how it’s done:

  1. Press and release the Volume Up button quickly.
  2. Press and release the Volume Down button quickly.
  3. Lastly, press and hold the Side button for a few seconds until you see the Apple logo.

After rebooting your device, connect to your Wi-Fi network and check if the issue has been resolved.

 

Second solution: Toggle Airplane mode on and off.

Software glitches could cause connectivity errors on your device and may have been the reason why the Wi-Fi signal keeps on disconnecting after updating to iOS 13.2. Performing a refresh on your connections often removes glitches that may cause connectivity issues. Toggling the airplane mode on and off has been one of the most simple methods that will provide a holistic approach on refreshing connections. Enabling this feature will turn off all wireless radios and disabling it after resumes  them. If you want to do this, here are the steps:

  1. Access Settings from the Home screen.
  2. Check Airplane mode. If toggle is currently turned on, tap on it to switch it off. If not, tap the toggle to turn it on.
  3. While the Airplane mode is enabled, perform a soft reset on your device.
  4. Wait for your phone to go back online after the reset then access Settings > Airplane mode. Tap the switch to disable the feature.

While the phone is rebooting, you can also refresh your wireless modem/router. Performing a power cycle on your equipment can remove firmware crashes that may also trigger relevant symptoms to occur. To reboot your wireless router/mode, here’s how:

  1. Press the power button on your modem/router until it powers down.
  2. While it’s turned off, unplug its AC adapter from the power source.
  3. Wait for at least 30 seconds then plug back in and turn it on.
  4. Allow the Wi-Fi signal indicator to be established and be stable.

After rebooting both your phone and router/modem, connect to your Wi-Fi network and see if the issue has been rectified.

 

Third solution: Reset network settings to fix iPhone X that keeps losing Wi-Fi signal.

Constant Wi-Fi disconnection can also be due to incorrect or invalid settings on your device. To deal with this, performing reset network settings might help. Doing so will erase all customized network settings and revert them to their default values and options. iOS overrides will also be removed along with the process. If this is something that you want to try, follow the steps below:

  1. Access Settings from the Home screen.
  2. Tap General.
  3. Scroll down to and then select Reset.
  4. Tap the Reset All Settings option.
  5. Enter your device passcode once prompted.
  6. Then tap to confirm all settings reset.

Your phone will reboot automatically after the reset is completed. Reconnect to your Wi-Fi network and monitor if your phone loses Wi-Fi signal.

 

Fourth solution: Factory reset your iPhone X.

If the problem has been caused already by complex system error, simple solutions might not be enough. For this matter, performing a factory reset might do the trick. This process will remove all stubborn glitches caused by the software update by erasing all contents on your device and reverting them to the default factory configurations. Since it will also delete your personal information, creating backups through iTunes or iCloud is recommended beforehand. If everything is set, perform the steps below to execute a master reset on your iPhone X:

  1. Access Settings from the Home screen.
  2. Tap General.
  3. Scroll down to and then select Reset.
  4. Tap the Erase all contents and settings option.
  5. Enter your device passcode once prompted.
  6. Then tap to confirm all settings reset.

Once the factory reset is completed, your device will reboot automatically. Setup everything like the first time you got your iPhone X. After setting it up, check if it still loses the Wi-Fi signal.

 

Fifth solution: Recover your iPhone X via iTunes.

A recovery mode restore will allow you to restore your iPhone using the previous backup that has been created prior updating to iOS 13.2. This will be a great way on removing fatal system errors that’s affecting your phone’s system and causes your iPhone X to keep losing Wi-Fi signal.

To perform this process, you’ll need to prepare a Mac or Windows computer with the latest iTunes installed. Also ensure that they’re running on their latest operating system. If all requirements are met, execute the steps below:

  1. Using the Apple-supplied USB/lightning cable, connect your iPhone to the computer that you used to synced before. Press and release the Volume Up button quickly.
  2. Press and release the Volume Down button quickly.
  3. Lastly, press and hold the Side button for a few seconds until you see the Apple logo.
  4. Open iTunes on your computer once it’s connected.
  5. From the iTunes main screen, select the Sync option.
  6. Once prompted, enter your device passcode to unlock your phone. This will backup your iPhone to the computer.
  7. Click the option to Restore iPhone from the most recent backup.
  8. Then follow the rest of the on-screen prompts to complete the process.

After restoring your iPhone, connect to your Wi-Fi network and check if the problem has been gone.

 

Still having an iPhone X that keeps losing Wi-Fi signal?

If the issue persists after performing all listed procedures above, you might need to contact Apple support for additional information and official recommendations on how to handle the problem. Just ensure that you’ll contact your Internet service provider as well as there might be an ongoing service outages or maintenance that affects Wi-Fi connectivity. You can also bring your device to the nearest Apple service center in your area and have it checked by their onsite technician. There might be a faulty hardware that causes your iPhone X to keep losing Wi-Fi signal and coincidentally happened after installing iOS 13.2 update.