Smartphones are deemed among other external devices when they’re attached to the computer through USB cable or connector. Normally, the computer will recognize other connected devices as an external storage media. This is also what happens by the time you connect your iPhone 6s to a computer. Once the computer recognizes the phone, connection is established and file access will be granted. One of the important requisites for both your iOS device and the computer to communicate with each other is iTunes. It is through the iTunes software that the computer can access contents stored on your iPhone. The computer also uses iTunes to access the iPhone’s system layer, allowing you to manage, update, and restore iOS. But not all the time everything works as they always do.
There are times when things go wrong and iTunes wouldn’t be able to communicate with your iPhone. There have been a number of reports regarding various types of issues and errors encountered by iOS device users when trying to use iTunes for device downloading contents, updating, and restoring iOS. One of the iTunes problems many people have encountered is iTunes error 0xE. These error code denotes that iTunes could not connect to the iPhone 6s or other iOS device because an unknown error occured. When this error appears, you won’t be able to continue using iTunes as the program usually responds slow, freezes, or even crashes. What causes this iTunes error to occur and how to deal with it? These are the questions that this post is trying to address. Read on to learn more.
But before we jump right into our troubleshooting, if you have other issues with your iPhone, make sure you drop by our troubleshooting page because we’ve already addressed a lot of issues reported by our readers. Find issues that are similar with yours and use the solutions we suggested. If they don’t work for you or if you need more help, fill up our iPhone problems questionnaire and give us more accurate information about your problem so we can give you the best solution.
What causes iTunes error 0xE on my iPhone 6s?
The unknown error 0xE in iTunes denotes that something is preventing the computer or iTunes from establishing connection and communicate with your iPhone 6s. In most cases, the problem lies within the physical connection between both devices like a faulty USB cable or USB port. Other identified factor that can cause similar iTunes error to occur are security software like antivirus or firewall installed on the computer. Generally, the underlying cause is in the computer that is being used when trying to access and manage your iPhone contents through iTunes. So here’s how each of these factors trigger the unknown error 0xE when using iTunes with your iPhone 6s.
- Faulty USB cable or damaged USB port. As the error prompt denotes, the iTunes error 0xE is telling you that the computer does not detect or recognize your iPhone even if it already connected. One of the possible reasons as to why this happens is because you might be using a defective USB cable or the USB port on the computer you used to connect your iPhone to is damaged. As a result, the computer is unable to detect your iPhone even when it’s already connected to the computer’s USB port.
- To determine whether or not this is causing your trouble, try to use a different USB cable or connect your iPhone 6s to another USB port on the computer. Also try to remove any other USB devices that are plugged into your computer as they too can somehow trigger conflicts.
- Security software. In the case where a security software is to blame, there’s a chance that the computer is able to detect your device at first and then the connection gets lost when the security tool detects the external device (your iPhone) and see some security threats. Again, your iPhone will be treated as an external device that is connected to the computer. And part of the main tasks of security software is to bar any possible threats to the computer system. Perhaps it perceives possible risks that is why it’s denying access to your iPhone. As a result, your iPhone has lost communication and is no longer seen or recognized in iTunes. To rule this out from the possible causes, try to disable any security software like antivirus or firewall installed on the computer then reconnect your iPhone without them enabled. If the error does not show up and your computer is able to detect your iPhone without any active security tool, keep it disabled until you’re done using iTunes. You can enable them back anyway. Another option you can consider in this case is to use a different computer (if available). Sometimes, it would be difficult to pinpoint the underlying cause especially if the error persists after disabling antivirus, firewall or other security suite. Other iPhone users who have encountered similar issue when trying to connect their device to the computer found that the problem is isolated to a certain computer as everything works fine when they used a different computer.
- Outdated system. The software version on both iTunes and your computer also matters. There are times when iTunes on your computer does not recognize your connected iOS device and prompts you with an unknown error 0xE due to an outdated operating system on your Mac or Windows computer. The same thing can happen when using an outdated version of iTunes. To make sure that this is not causing this unknown error to show, verify and ensure that your iTunes and computer software are both up-to-date. Update your computer software and install the latest version of iTunes on your computer, if necessary.
What to do if your iPhone 6s is not recognized in iTunes and how to fix iTunes unknown error 0xE?
Now that you already have some clues on the possible causes of iTunes error 0xE, the next thing to do is check and do the following:
- USB cable/connector and USB port. Check and ensure that you are using a functional USB cable and the USB port you are using is working. Unplug all USB accessories from your computer except your iPhone and try each USB port to see if one works. Also try to use a different Apple USB cable if available.
- Software versions. Check and ensure that you are using the latest version of iTunes and operating system of your computer.
- Security software. If a security software is enabled on your computer, try to disable it temporarily and then connect your iPhone again.
- Power. Make sure that your iPhone is turned on when you connect it to the computer. If you are prompted with the Trust This Computer alert after you connect your iPhone to the computer, tap Trust to proceed.
- Computer. Try to connect your iPhone to another computer. If the other computer also does not recognize your iPhone.
Potential Solutions and Suggested Workarounds to deal with unknown error 0xE in iTunes
Try the following solutions and then see if any of these is able to rectify the problem on your end. Other iPhone users who have dealt with the same error in iTunes were able to fix it by performing these procedures so you might as well consider giving them a try on your end.
First Solution: Restart
Restart your computer and your iPhone 6s. This should be the first workaround to consider. Should the problem is triggered by random system malfunction on either the iPhone or computer you are using, it should be dealt with by a restart. That being said, try to restart your computer. After the computer reboots, restart your iPhone 6s as well. Then try to connect your iPhone to the computer to see if it is now working as intended.
In the case where the unknown error 0xE has caused your computer or iPhone to freeze, a force reboot would be necessary. To do so, press and hold the Power button on the CPU until the computer powers off. Press the Power button again to turn it back on.
- On your iPhone, a force restart is done by pressing and holding the Power and Home buttons simultaneously and then release both buttons when the Apple logo appears. The iPhone will then reboot.
Second Solution: Check the USB device drivers on your computer.
Generally, USB devices that are connected or attached to the computer will be shown in the USB device drivers directory of the computer. The path may vary depending on the operating system the computer is running on (Windows or Mac). Here’s how to check on this details.
If you are using a Mac computer and your iPhone is not recognized in iTunes, follow these steps:
- Hold down the Option key on your iPhone screen.
- Click the Apple menu.
- Select System Information or System Report.
- Navigate to the list of items on the left panel.
- Select USB. Doing so will open a new panel on labelled as USB Device Tree. It contains the list of USB devices that are currently attached or connected to the computer.
- Look for your iPhone 6s under the USB Device Tree list. If you see it, then uninstall third-party security software because it’s most likely hindering the connection between the two devices. Otherwise, contact Apple Support for other options.
If you are using a Windows computer, reinstall the Apple Mobile Device USB driver or follow these steps:
- Disconnect your iPhone 6s from the computer.
- Reconnect your iPhone after a few seconds.
- If the iTunes program opens, close it.
- Press the Windows logo and R keys on your keyboard. Doing so will open the Run command. The Run command contains a box for you to enter commands or directory paths to access on the computer.
- In the Run dialog box, enter or type the following line of codes:
%ProgramFiles%\Common Files\Apple\Mobile Device Support\Drivers
- Click OK to continue.
- Right-click on the file named usbaapl64.inf or usbaapl.inf and select the option to Install.
- Be sure to install the file that ends in with .inf extension. If you are not sure of which file to install, right click a blank area in the File Explorer Window, click View, and then click Details to find the correct file type.
- Disconnect your iPhone from the computer and then reboot your computer.
- After the computer completes the reboot process, reconnect your iPhone 6s to the computer and then open iTunes.
If your iPhone is still not recognized in iTunes and you still get the unknown error 0xE, try the next possible solution.
Third Solution: Check the Device Manager
The Device Manager contains various types of drivers installed and used on your computer. In this case, try to check the Device Manager and see if the Apple Mobile Device USB driver is installed. Here’s how to access the Device Manager on your computer.
- Press the Windows and R key on your keyboard to open the Run command.
- In the Run dialog screen, enter devmgmt.msc then click OK. Doing so will open the Device Manager screen.
- Scroll to and expand the Universal Serial Bus controllers section.
- Look for Apple Mobile Device USB driver.
If you don’t see the Apple Mobile Device USB driver or you see Unknown Device instead, try to connect your iPhone to your computer using a different USB cable or connect your iPhone to a different computer.
If you see the Apple Mobile Device USB driver with an error, exclamation, or question mark, try to restart the Apple Mobile Device Service (AMDS), disable third-party security software, then restart your computer.
Here’s how to restart AMDS:
- Close the iTunes program.
- Disconnect your iPhone 6s from the computer.
- Open the Run command by simultaneously pressing the Windows logo key and the R key on your computer keyboard.
- Type services.msc in the Run command search box. Doing so will open the services console.
- Right-click on Apple Mobile Device Service.
- Click Properties in the shortcut menu.
- Set the Startup type pop-up menu to Automatic.
- Click Stop the service.
- Click Start the service after the service has stopped.
- Click OK.
- Restart your computer.
- Open iTunes after the restart.
- Connect your iPhone 6s to the computer again.
If the AMDS won’t start or stops unexpectedly, it could be triggered by third-party security software. Your security software could be interfering with the computer’s connection with iTunes. Try to remove or disable any third-party security software installed on your computer and try the steps again. Otherwise, work with your security software provider to allow the complete list of ports and services that Apple products use. Restarting AMDS is recommended especially if you are getting an error message saying that, “This [device] cannot be used because the Apple Mobile Device Service is not started.”
Fourth Solution: Reset Lockdown folder.
The Lockdown folder is a protected and hidden folder that contains all kinds of temporary data, mostly related to the syncing of Apple devices with iTunes. This folder is present on all computer that have iTunes program installed. Resetting the Lockdown folder can help erase any corrupt data in it that somehow caused iTunes errors and issues to occur including iOS device recognition error. Here’s how it works:
- Disconnect all Apple devices that are currently connected to your computer.
- Open the Run command by pressing the Windows logo key and R key on the computer keyboard.
- Type %ProgramData% into the Run command search box and press Enter.
- Look for the folder named Apple and then double-click on it. The folder will then open.
- Look for the folder named Lockdown and right-click on it.
- Scroll to and click Delete.
- If prompted, click Delete or OK to confirm action.
Restart your computer and then see if the problem has been resolved afterwards.
Fifth Solution: Uninstall and reinstall iTunes and its components.
Uninstalling iTunes and all of its components is another effective solution to various types of errors when using the program to manage your iOS device. Doing so will remove any corrupted or erratic data from iTunes. Here’s how to uninstall iTunes from the computer and re-install it from scratch.
- Hold the Windows logo key and press R key on the keyboard. Doing so will open the Run command screen.
- Type appwiz.cpl in the Run command search box then click OK. A list of programs installed on your computer is displayed.
- Right-click on the following programs — iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, Apple Application Support, iCloud (individually) and click on Uninstall.
- Restart your computer.
- Re-install iTunes by going to the Apple Support website and download the latest version of iTunes for your computer.
- Follow the onscreen instructions to complete the iTunes download and installation process.
- After successfully installing iTunes, reboot your computer then connect your iPhone 6s to the computer again and see if the error is already gone.
- Check and ensure that the date, time, and timezone are set correctly on your computer. Incorrect date and time settings can also cause you the same trouble especially with a security software running on the computer.
- Log in to an administrative user account not as guest. Logging into your computer as Administrator will ensure that you all have full access on the computer services and applications. Access or control to certain devices attached to the computer might be limited or restricted if you logged in as Guest on your computer.
Escalate the problem and seek More Help
So you have tried every possible solution and applicable workarounds but your iPhone 6s is still not recognized in iTunes and that you are still getting an unknown error 0xE. You also tried to use a different computer but still having the same issue. If you did so, then you should now consider escalating the problem to Apple Support for further assistance and recommendations.
Connect with us
If you have other problems with your iOS device including iPhone 6s, you may visit our Troubleshooting Page or complete and submit this form to get further assistance from our support team. Just be sure to provide us with all necessary information, such as your iOS device model, as well as more details about the issue you have with your device. For example, when did the problem start to occur or what you did before the problem shows. This way, it would be easier for us to determine the main cause(s) and help you towards finding the best possible solution available.